31 October 2025It’s almost like a universal rite of passage for every car owner. A moment which can spark frustration, anxiety, or even indifference that could end up costing them.
When the Service Engine Soon (SES) light suddenly flashes on your dashboard, it’s easy to panic. Even a brand-new car can throw this warning at you, and sometimes it’s something simple, like a loose gas cap. Other times, it could be a more serious issue that might make a dent in your bank account if left unchecked.
So how to get that little orange light flashes to disappear? First, Let’s start by understanding why it switched on in the first place. Your car might look perfectly fine on the outside, but the SES light is your dashboard’s way of saying, "I’m feeling a little off, time for a pit stop buddy!”.
Here’s a guide from our team at Nissan of Vero Beach to help you understand when it’s safe to reset the light, how to do it, and how to prevent it from coming back.
When You Should (and Shouldn’t) Reset the Light
When It’s Safe to Reset
Never attempt a reset without checking for the underlying issue!
Here are a few minor problems that may trigger the Service Engine Soon (SES) light:
- A loose or faulty gas cap
- A temporary sensor glitch
- A minor system error after maintenance
If your Nissan is running smoothly and the issue seems to fall under one of these categories, it’s usually safe to try resetting the light yourself. A simple manual reset often clears the warning and restores your dashboard to normal.
When You Should Visit a Mechanic Instead
If your Nissan shows any of the following symptoms, avoid resetting the light yourself:
- Rough idling or stalling
- Decreased fuel efficiency
- Unusual noises or vibrations
- The warning light reappears after multiple resets
It’s highly recommended to play it safe here, better to prevent a costly engine failure later. The best move is to bring your car to a Nissan Service in Vero Beach, where certified technicians have the right tools and expertise to pinpoint the issue accurately.
Remember, resetting the light without fixing the root problem may only make it come back stronger later.
Step-by-Step Guide to Resetting the Service Engine Light
Once you’ve identified that the problem is minor, you can try one of these Nissan service light reset instructions yourself.
Method 1 – Using the Ignition Key
This is the simplest and safest method for most Nissan models.
- Insert the key into the ignition and turn it to the "ON” position (don’t start the engine).
- Wait for about 3 seconds, then press and release the gas pedal fully five times within 5 seconds.
- Wait 7 seconds, then press and hold the gas pedal for 10 seconds until the light begins to flash.
- Release the pedal and turn off the ignition.
- After a few seconds, start the engine to see if the light has been turned off.
Timing is crucial with this method. If it doesn’t work the first time, repeat the steps carefully.
Method 2 – Disconnecting the Battery
If the ignition method doesn’t work, you can try resetting the system through the battery.
- Turn off your car completely.
- Open the hood and remove the negative battery terminal using a wrench.
- Leave it disconnected for 15–20 minutes. This resets the Engine Control Unit (ECU) and clears stored codes.
- Reconnect and tighten the terminal.
- Start your Nissan to check if the Service Engine Soon light is gone.
Note: This method may also reset your clock and radio presets since it clears all stored codes.
Method 3 – Using an OBD-II Scanner
An OBD-II (On-Board Diagnostics) scanner is the most reliable way to clear the service light on a Nissan vehicle and identify error codes. These scanners are available online or at most auto parts stores.
- Locate your Nissan’s OBD-II port (usually under the steering column).
- Plug in the scanner and turn the ignition to the "ON” position.
- Follow the device’s menu to read and clear diagnostic trouble codes (DTCs).
- After clearing, take your vehicle for a short drive to confirm the light stays off.
If the same code reappears shortly after, it’s time to have the issue professionally diagnosed at your local Nissan Service in Vero Beach.
Keep the Light Off with Regular Maintenance
The best way to avoid seeing that Service Engine Soon light again is through consistent preventive maintenance. Follow these simple steps to keep your Nissan’s engine in good shape:
- Replace air filters and spark plugs as recommended
- Use premium fuel and oil suited for your Nissan model
- Always tighten your gas cap securely after refueling
- Schedule regular diagnostic checks at a trusted Nissan Service in Vero Beach
Routine maintenance not only keeps your engine running smoothly but also prevents costly repairs later down the road.
Reset Responsibly: Fix the Root Cause First!
Resetting the service light may give temporary relief, but it’s never a permanent solution unless the underlying issue is addressed. Think of it as your Nissan’s way of talking to you — it’s better to listen before silencing it.
For accurate diagnostics and lasting solutions, visit the Nissan Service at Nissan Vero Beach. Their certified technicians use advanced diagnostic tools to pinpoint the exact reason behind your Service Engine Soon light, ensuring it’s fixed the right way the first time. Whether it’s a simple sensor reset or a deeper engine inspection, they’ll make sure your Nissan performs reliably and stays true to factory standards.
